rubber water stop seal

1.rubber water stop 2.Certificate:ISO9001:2000 3.Sizes:up to the customer Guarante delivery on time Specifications

 

1.rubber water stop 2.Certificate:ISO9001:2000 3.Sizes:up to the customer 4.Delivery Term:6 days Guarantee delivery on time

 

 

Installation of expanding rubber water stop Most popular way of the placement of the water stop seal is tied to the steel frame works or small eyelet by means of small wires, certain metal clamps made to grip the water stop seal to keep it in proper position. Our waterstops are profiles based on specially formulated plasticized PVC compound, which are designed to meet specific requirement of building industry. It is essential that a device is used against potential risk of discomfiture that tends to be caused in concrete structure following climatic, geo-disturbances and frictional impasse which result in expansion or contraction in concrete structure. And the expansion or contraction results in leakage/seepage of water exposing the structure to bring the risk of cracks or dismemberment.

Applications of expanding rubber water stop

Rubber Water stop is widely used in underground installation, tunnel and culvert, impounding reservoir, metro, and retaining dam and so on.

 

Features of our expanding rubber water stop

1. The Rubber Water stop strip will expand when getting in touch with water, so allowing it to come into closer contact with the concrete, creating a better water-stop result.

2. Different thicknesses structure of Rubber Water stop is adopted for the cross section, which is divided into the high-strength area, the waterproof area and the installation area, allowing for uniform and reasonable stress for all portions.

3. There is installing hole at installation area of Rubber Water stop, it could facilitate fixed with adjacent reinforced, and not produce shifting. Construction of our Rubber Water stop is convenient, positioning installation is firm.

 

Types of expanding rubber water stop

1. Common Rubber Water stop

2. Swellable Rubber Water stops/Hydrophilic Rubber Water stop belt

3. Rubber Water stop with Steel Side

 

Physical property of expanding rubber water stop

Items				index
				B	S	J
1. Hardness ( Shore A )				60±5	60±5	60±5
2.Tensile strength ,MPa                            ≥				15	12	10
3.Elongation at break , %                 ≥				380	380	300
4.Compression set %		70ºC×24h,%        ≤		35	35	35
		23ºC×168h,%          ≤		20	20	20
5.Tear strength,KN/m                                ≥				30	25	25
6.Brittleness temperature,°C                                     ≤				-45	-40	-40
7.Air aging	70ºC×168h		Hardness ( Shore A )   ≤	8	8	--
			Tensile strength,MPa          ≥	12	10
			Elongation at break , %           ≥	300	300
	100ºC×168h		Hardness ( Shore A )   ≤	--	--	8
			Tensile strength, MPa          ≥			9
			Elongation at break , %           ≥			250
8. Resistance ozone ageing 50pphm: 20%,  48h				2grade	2 grade	0 grade
9. Adhesion of rubber to metal				With contact section in elastomer

 Notes:

(1) Adhesion of rubber to metal is used to the rubber water stop with steel edge.

(2) If there are other special requirements, it could add inspection items properly after making deal by both sides. When as users’ requirements to check mildew test according to the circumstances, the mildew proof property must be equal to or over Grade 2.

rubber water stop seal